{{statusText}}
{{statusText}}
jq78061

How to reset Z-Wave Multi-Sensor Quad by Zipato?

Note: {{noteText}}
{{noteText}}
 
 
  •  
  •  
  •  
Answered by Jean Duncan
0 Upvotes

type caption for image (optional)
Tamper switch - Zipato Multi-Sensor Quad



To reset the Z-Wave Multi-Sensor Quad by Zipato, follow the below procedure:

  1. Press the tamper key four times continuously

  2. During the fourth press, hold the Tamper key until the LED blinks.

  3. After 3 seconds the LED will turn OFF

  4. Release the tamper key after 2 seconds.

  5. If the Reset process was successful, the LED will glow for 1 second, else it will flash only once.

  6. In case of failure, repeat the procedure.
 
jca66621
Note: {{noteText}}
{{noteText}}
Written 4 years ago
 
 
  •  
  •  
  •  
Scroll Down