Installing the Fibaro RGBW Micro Controller
First step before you install the Fibaro RGBW Micro Controller you should make sure that the voltage supply is disconnected.
Then you would have to connect the Fibaro RGBW Controller to the RGBW strips according to this wiring diagram.
Start by connecting the outputs (R,G,B,W) RGB/RGBW/LED diodes or halogen lights or inputs. After that connect the voltage supply. Make sure that the device is powered by a dedicated stabilized power adapter.
Then you should arrange the antenna.
Now, turn on the voltage.
- After this you should include the module into the Z-Wave network.