Go to Scenes in the Menu bar of the CentraLite LiteJet Control system. There are about 5 built-in scenes.
These scenes cannot be modified and the Power Up scene comes to play when there is a power cut, you have to set loads to this scene as what all has to be powered up. Then it goes back to normal state when the power comes back. This scene cannot be assigned.
The first step is to choose a scene in Choose Scene Here from a drop down menu.
Then give a name to the scene in the Scene Name.
If you want a particular scene to be turned off after some time enter it in the Scene Timeout, if not keep it as zero.
After this, you should set what all loads you want for a particular scene.
Choose the loads from Include Loads and as you choose it comes on the left panel "Set Loads".
Then you click on a load in Set Loads to set the Level, Rate, Delay for it; when you click on it the background turns purple.
Level: Is the level to which you can dim the light. In the case of non-dimmer, you can either set it to 0% or 100%. If the load should go off in the scene, then set it to 0%.
Rate: Is the time taken to reach 100%. If you want it on instantly then set it in zero.
Delay: This is the time taken before the load is turned on.
You can set these settings for all loads using Set All.
Using Select All you can include all the load in the system to this scene.
Deselect All removes all the loads included in this scene.