{{statusText}}
{{statusText}}
jq78023

How do I mount the Aeon Labs ZW120 Door/Window Sensor?

Note: {{noteText}}
{{noteText}}
 
 
  •  
  •  
  •  
Answered by Judith Wagner
0 Upvotes

Mounting the Aeon Labs ZW120 Door/Window Sensor involves two steps:

  • Inclusion of sensor to the Z-Wave controller

  • Installing the Sensor and Magnetic unit


Inclusion of the the Aeon Labs ZW120 Door/Window Sensor:

  1. Make sure your Z-Wave controller is in Inclusion mode.

  2. Place the sensor within the proximity of the Controller and press the action button.

  3. If your LED blinks fastly for 2 seconds, then the sensor has been added to the controller.

  4. If not the LED blinks faster continuously for 8 seconds. This is when you gotta continue the above step again.



Installing the Sensor and Magnetic unit:


  1. Place the unit within 30 meters from a non-battery powered Z-wave controller.

  2. The magnet should be affixed to the frame and the sensor unit should be affixed to the door. Use the adhesive tape or screw to affix them.

  3. The distance between them should be at between 1.5 cm and 2 cm. Should you fix them exceeding the limit, they won’t work efficiently.


type caption for image (optional)
Mounting Aeon Labs ZW120 Door/Window Sensor 



jca66584
Note: {{noteText}}
{{noteText}}
Written 4 years ago
 
 
  •  
  •  
  •  
Scroll Down