{{statusText}}
{{statusText}}
jq78043

Can anyone tell me how the tamper switch of the Everspring Z-Wave Indoor Siren (SE812-US) works?

Note: {{noteText}}
{{noteText}}
 
 
  •  
  •  
  •  
Answered by Ruth Jackson
0 Upvotes

Everspring Z-Wave Indoor Siren (SE812-US) comes with a Tamper switch that prevents the siren from being removed from the wall by force. There are two jumper links inside the siren and you can install them by:


  1. Two-Phase Sound Jumper Link

  2. Tamper Jumper Link

All you have to do to enable or disable the jumper link is by fitting it on or removing it. Within three seconds of pressing the Jumper Link, the function of tamper protection is enabled. If you remove the unit from the rear cover, the tamper switch is also removed which generates a full alarm for 3 minutes along with strobe light flashing. 
jca66603
Note: {{noteText}}
{{noteText}}
Written 4 years ago
 
 
  •  
  •  
  •  
Scroll Down